FALCAM TreeRoot Pro Quick-Lock Travel Tripod by a waterfall

Set Up Fast. Shoot Steady. Go Anywhere.

A compact carbon-fiber tripod built for fast setup, steady telephoto shots, and confident shooting from high angles to ground level.

Hiker carrying the folded TreeRoot Pro tripod by its shaped center column
TreeRoot Pro tripod with a caged camera set up on rocks in a stream
TreeRoot Pro shaped center column and hybrid leg tubes compared with round and shaped-tube tripods

 Stay Steady When the Conditions Change 

M40 high-modulus carbon fiber, a rigid hybrid tube design, and a low-center-of-gravity Ø40 mm ball head work together to reduce movement in wind, uneven terrain, and telephoto shooting.

M40 carbon fiber legs with 1.3 mm walls, 60%+ higher Young's modulus than T300, 2.0 mm carbon fiber center column

 M40 High-Modulus Carbon FiberBuilt for Greater Rigidity and Stability 

Withstands tensile and bending forces for a more rigid, stable setup.

*60%+ Higher Young’s Modulus Than T300*With the same single-filament fiber

*2.0mm Thickened Carbon Fiber Center ColumnLighter than aluminum, yet more stable.

Hand twisting the TreeRoot Pro 1/3-turn quick lock
TreeRoot Pro set up low with the center column removed, photographer shooting near the ground

1/3 Turn Quick-Lock DesignFast & Effortless 

A simple 1/3 turn is all it takes to extend or retract each leg, making setup and pack-down fast and easy. 
Utility Model Patent: CN202322547699


Built-In Stop Design
No need to check the locking direction. Lock by feel to prevent misalignment and accidental leg tube removal.

F38 Pro quick release clamp on the TreeRoot Pro ball head by a lake
Sliding a long lens plate in the F38 Pro clamp to balance a telephoto lens; safety stop mechanism

F38 Pro Quick Release Quick Setup, More Freedom

Compatible with long quick release plates. Slide your telephoto setup forward or backward for quick, easy balancing.

Compatible with most Arca-type quick release plates

  • Anti-Slip Protection: Featuring an adaptive stopper and a built-in stopper groove.
  • F38 Safety Lock Quick Release Plate Included: Secure Mounting, Shoot with Confidence.
F38 Pro ball head with large 40 mm ball on the TreeRoot Pro
Long exposure of a waterfall shot on the TreeRoot Pro tripod

Ø40 mm Large Ball: Low Center of Gravity, Stable Support

A low center of gravity helps minimize unwanted movement in challenging outdoor conditions, keeping your setup steady for sharper, clearer telephoto shots.

  • Ø40 mm: Large Ball
  • Low Center of Gravity: Upright Ball Head Design
  • 8 kg: Recommended Max Static Load
  • ≈10 N·m: Initial Ball Head Locking Torque (Adjustable)
  • Ø15.6 mm: High-Rigidity Support Shaft
Photographer with a telephoto lens on TreeRoot Pro: 40 mm ball, 10 N·m locking torque, 15.6 mm support shaft
F38 Pro ball head adjustable damping, one-pull locking lever and adjustable locking force

Adjustable Damping:  Stay Steady, Even Unlocked

Stay supported when unlocked. No sudden drops—just smooth, controlled adjustments.

One-Pull Locking, Simple & Effortless: A single pull locks it securely, even in the dark, rain, cold, or with gloves on.

Adjustable Locking ForceAdapts to Changing Conditions: Tool-free adjustment, quick and easy.

Camera on the TreeRoot Pro panning 360° by a lake
F38 Pro ball head 360° ball rotation, 360° pan rotation, 90° vertical shooting, bubble level, 13 N·m pan lock

Horizontal, Vertical or Panoramic: Frame It Your Way

One ball head, multiple shooting angles. Switch to 90° vertical shooting, rotate the ball head 360°, or pan independently for effortless, flexible framing.

TreeRoot Pro rubber feet and built-in spikes on tile, rock, sand and ice

All-Terrain Support Ready to Shoot

Rubber feet keep your tripod steady on smooth surfaces like tile and wood floors, while built-in spikes grip firmly into mud, ice, and other uneven terrain.

Packing the folded TreeRoot Pro tripod into a case on a hillside
TreeRoot Pro with a camera, magic arm and light mounted on the leg hub
TreeRoot Pro carried on a shoulder strap; power bank mounted on the tripod
F38 Pro ball head 401P with 3/8" mounting thread above the TreeRoot Pro hub: 1/4" expansion mount, F22 quick release mount, lanyard hole

Travel Light, Create More

Folds Down Compact, Easy to Carry
The shaped center column keeps the tripod compact and comfortable to grip, making it easy to carry wherever you go. 

Expand Your Setup

Add a monitor, power bank, SSD, or other gear to your setup. Carry it with a shoulder strap for easy portability on the go.

TreeRoot Pro T00A6101+F38B6501 specifications table
TreeRoot Pro kit contents laid out next to the FALCAM box: tripod, ball head, case and tools

Packing List 

TreeRoot Pro Tripod ×1
F38 Pro Quick Release Ball Head (401P) ×1
H4 Hex Key ×2
H2.5*T6 Dual-Purpose Wrench ×1
T8 L-Shaped Wrench ×1
Small-Head Screws ×2
1st Lock Stop Ring ×3
2nd Lock Stop Ring ×3
3rd Lock Stop Ring ×3
User Manual ×1

Backed for Life. Only Here.

Buy TreeRoot Pro directly from the FALCAM Official Store and it's covered by our lifetime warranty — an exclusive benefit you won't get anywhere else.

FAQs

Answers to common questions about TreeRoot Pro.

How much does TreeRoot Pro weigh, and how small does it fold?

The kit with the F38 Pro ball head weighs about 1.7 kg (3.75 lb) and folds to about 51.5 cm (20.28 in), with a diameter of about 88 mm. The shaped center column keeps the folded tripod compact and comfortable to hold.

How tall does it go, and how low?

About 160 cm (62.99 in) with the center column extended, 135 cm (53.15 in) with it retracted and 134 cm (52.76 in) with it removed. Remove the center column without tools to shoot as low as 22.4 cm (8.82 in).

How much weight can it hold?

The tripod legs have a static load capacity of 50 kg (110.23 lb). The F38 Pro ball head (401P) has a recommended maximum static load of 8 kg (17.64 lb), with a 40 mm ball and a 15.6 mm support shaft. With a heavy telephoto lens, mount the plate on the lens's tripod collar to keep the setup balanced.

Which version should I buy?

Choose the TreeRoot Pro Kit for the tripod with the F38 Pro ball head (401P), Only Tripod if you already have a head with a 3/8" mount, or Only Ball Head to add the 401P to another tripod.

What feet does it have?

Rubber feet keep it steady on smooth floors like tile and wood, and built-in spikes grip mud, ice and uneven ground.

What's the difference between TreeRoot and TreeRoot Pro?

TreeRoot Pro is upgraded for center-column stability, faster quick release and a more capable ball head, so it suits demanding setups where stability matters most. Key differences:

  • Center column: a carbon fiber center column with a three-sided clamping lock holds tighter and stays steadier when raised.
  • Ball head: TreeRoot uses an inverted ball head for a more compact fold. TreeRoot Pro comes with an upright ball head with a larger ball and lower center of gravity, better for telephoto lenses.
  • Quick release: TreeRoot Pro adds the TR quick-release system, so you can switch between shooting with or without the center column.
  • Column removal: TreeRoot uses a latch-type release; TreeRoot Pro uses a push-to-release design that makes removing the column and inverted shooting easier.
  • Ball head handling: the F38 Pro upright ball head has a smoother press-in quick-release action.
  • Tool-free adjustment: the clamp lever tension on the TreeRoot Pro head can be adjusted by hand, so you can compensate for temperature changes while traveling.
How is the 1/3-turn quick lock different from a regular twist lock?

Each TreeRoot Pro leg section locks or unlocks with about a 1/3 turn, much faster than traditional twist locks that need several full rotations. The built-in stop also lets you feel whether a leg is locked or unlocked, even in the dark or without looking, which helps prevent mistakes.

Is the center column compatible between TreeRoot and TreeRoot Pro?

No. TreeRoot Pro uses a redesigned center column shape and locking structure, so the two center columns are not interchangeable.

Can I swap ball heads between TreeRoot and TreeRoot Pro?

Not directly. The ball head of TreeRoot (R141K-320P) and the F38 Pro ball head (401P) that comes with TreeRoot Pro use different center column and connection structures, so they can't be swapped as-is.

Both heads have a 3/8" thread on the bottom, so these combinations do work:

  • The 401P ball head (SKU: F38B6501) fits the TreeRoot flat-top tripod (SKU: T00A4302).
  • The 320P ball head (SKU: F38B4303) fits the TreeRoot Pro tripod legs (Only Tripod version).
Can I use a third-party ball head? Will quick release still work?

Yes. TreeRoot Pro has a standard 3/8" thread, so any head with a matching mount will fit. With a third-party head, the TR quick-release feature is no longer available, and other functions depend on that head's own design.

Can I use the F38 Pro ball head (401P) on other tripods?

Yes. The 401P ball head has a standard 3/8" thread and fits any tripod with a matching mount. On other brands' tripods, the TR quick-release feature is unavailable, but all other ball head functions work normally.

Is it Arca-Swiss compatible? Which plates does it work with?

The quick-release clamp works with most Arca-Swiss type plates and camera cages, including many long plates. Because Arca-type accessories vary in size and design between brands, we can't guarantee every one will fit. Check the clamp dimensions in the user manual, or contact us with your plate's brand and model and we'll confirm.

Is it stable enough for a full-frame camera with a 70-200mm lens?

Yes, TreeRoot Pro can be used with a full-frame body and a 70-200mm telephoto lens. Real-world stability also depends on total weight, the lens's balance point, how the legs are set up and the shooting environment. With a telephoto lens, attach the quick-release plate to the lens's tripod collar rather than the camera body to keep the setup balanced and steady.

Will the tripod vibrate during long exposures?

Vibration during long exposures can come from wind, uneven ground, gear weight, how high the tripod is extended and how the shutter is triggered. For the sharpest results, set up on firm ground, keep the center column as low as possible, and use a self-timer or remote shutter. In strong wind or with long lenses, adjust the setup to suit the conditions.

How does it perform in windy conditions?

Stability in wind depends on wind speed and gusts, extension height, ground conditions and how much surface your gear presents to the wind. In strong wind, lower the tripod, spread the legs fully, double-check every lock, and retract the center column to lower the center of gravity. In very strong wind, judge on site whether it's safe to keep shooting.

What temperature range can it handle? Any tips for cold weather?

We recommend using TreeRoot Pro between -20°C and 60°C (-4°F to 140°F).

In cold weather, avoid hard impacts and check that the legs and locks work normally before use. If the tripod is covered in ice or snow, clear it off before extending or locking the legs, and don't force any lock or part to turn.

Sand or mud got into the legs. Will it affect use, and how do I clean it?

Sand, grit or mud inside the leg tubes or locks can make extending and locking less smooth, so clean the tripod soon after use. Wipe off surface dirt first, then clean the leg sections and let everything dry fully before packing it away.

If a leg doesn't extend smoothly or won't lock properly, don't force it. Contact our support team and we'll help.

How should I clean the tripod after shooting at the beach?

Salt spray and sand can build up on the tripod and inside the locks, so clean it soon after your shoot. Remove sand and salt residue from the surface, clean the leg sections, and let the tripod dry completely before storing it.

Don't use harsh or corrosive cleaners or add lubricant unless you're sure it's suitable. If the locks or legs feel abnormal, contact our support team.

How do I adjust the ball head damping?

With the ball locked, turn the damping knob on the ball head to set how much resistance the ball has, so it suits your gear's weight and how you like to compose.

The damping knob is stuck and won't turn. What should I do?

Stop turning it to avoid damaging the internal mechanism. Contact our support team with a photo or video of the issue and we'll help you sort it out.

There are small marks on the copper part of the clamp lever. Is it rust?

No. The lever's contact point is copper, and every head is tested before it ships. Light rubbing marks from that testing are normal and don't affect performance.

Why doesn't the 401P ball head have a 360° scale?

The F38 Pro ball head (401P) doesn't have a 360° scale. If you need one for panoramas, add a separate panning clamp with a degree scale on top of the head.

Does the lifetime warranty cover everything?

No. The lifetime warranty covers quality problems in the product's main body caused by manufacturing defects. Normal wear and tear, accidental damage, misuse and technical obsolescence are not covered.

What counts as normal use?

Using the product as designed and within the normal range described in the user manual. Rough handling or overloading (for example, exceeding the rated load capacity) is not normal use.

How do I make a warranty claim?

Contact our support team with clear photos and a video showing the problem, plus a short description of when it happened, where and how you were using it. If we need to inspect the product, we'll ask for your falcamstore.com order number and a photo of the product's S/N label, then open a service case for you.

Who pays for shipping on a warranty repair?

You pay to ship the product to us first. If the issue is confirmed to be covered, we cover shipping both ways. If it isn't covered, shipping both ways is at your cost.

Will I get a new product as a replacement?

Warranty replacements may use open-box, lightly used or refurbished products or parts. All of them pass quality inspection and keep the same warranty. Refurbished items may show very light cosmetic marks that don't affect function; if yours arrives with obvious scratches, contact us for an exchange.

Can I transfer the warranty if I give the tripod to someone else?

The lifetime warranty applies to the original purchaser only and can't be transferred. The original purchaser can still file a claim on the new owner's behalf, or the new owner can choose paid repair with the product's S/N.

What if a part becomes obsolete and can't be repaired?

For example, if an older interface standard is phased out. If a product can't be repaired because of technical obsolescence, we may replace it with an equivalent or better product that's currently in production.

Didn’t find your answer?

Don't hesitate to contact us.